Zoom control dial.
This provides a passage for the user air to pass though and eliminate the pressure different between the inside of the housing and the ambient.
Be sure they are inserted all the way flat manual to the housing before turning to avoid damaging the protrusions on the lid.
2) user D80 Opening Key / Lever (Fig.Camera Housing Model 400D (Canon user Manual, contents:.Canon manual ID, register your product and manage user your Canon ID user account.It is recommended user to remove the handle, and shutter extension, and wrap the camera in foam user or bubble wrap. Make a visual check of the boot O-ringseal.
Carrying bag, cleaning Kit, optional accessories, semi-DomePort for 1022mm Lens 580-EXe-ttlflashlight Housing.
It is an effective barrier only if the seal is properly maintained.
Please windows note that disassembly of the housing will invalidate warranty.
When transporting by air, please ensure the housing is not sealed, to allow the air pressure to equalize.
As a rule of thumb set up the camera and housing before a days diving.
Lay the lid on a flat stable surface after opening.
Please note the terms for servicing the housing posted at our website.10) Note: If the O-ringis in good contact, a thin black line, about.5 to 1mm in width should giochi be visible, where theO-ringis camry in contact with the lid.Note other types of silicone grease specifically for use with underwater camera equipment can usually also be used.A full service will include: Inspection of all components for wears or damage (report if repair necessary) Cleaning of all sealing surfaces, and replacement of all O-ringseals.The lid should be opened keeping it approximately paralleled to the body at all times, turn windows first one corner a little, then the other a little, and repeat again until the lid is opened.The warranty applies only to the housing itself.Function Controls 400D.Remember to ensure the pressure release plug is pulled all the way out creep while closing, otherwise patch the air cannot escape.No chemical cleaners should be used.The plug consists of an internal doubleO-ringseal on the stainless steel slide shaft.
Avoid exposure to fine sand.
Flex Arm, ball Join Arm, synchronous Cord.
Screw home eos 400d user manual pdf (clockwise) the pressure release plug (Fig.